Automatic Doors for Shops and Retail Premises: What Are Your Options?

Automatic doors for shops need to work for customers arriving with shopping bags, parents with pushchairs and people using wheelchairs or walking aids. Your entrance also needs to cope with busy periods, fit your shopfront and close securely when trading ends.

Automatic doors can make entering and leaving easier, but choosing a system involves more than deciding how the doors should look. The available space, the existing doorway and how people move around the entrance all influence which option will work best.

Whether you are replacing unreliable shop entrance doors or planning a refurbishment, here are the main options and the practical points to consider.

Automatic Sliding Doors for Shops

Automatic sliding doors open sideways, keeping the moving door leaves out of the approach route. This makes them worth considering where customers regularly enter and leave at the same time, or where a swinging door would interfere with circulation.

Automatic sliding entrance doors at a Co-op convenience store

They can suit supermarkets, larger high street shops, showrooms and retail park premises. However, their suitability depends on having enough space beside the opening for the leaves to slide into. Find out more about our automatic sliding doors.

Common configurations include:

  • Single sliding doors, with one moving leaf.
  • Bi-parting doors, with two leaves opening away from the centre.
  • Telescopic sliding doors, with multiple moving leaves that overlap as they open.

A telescopic arrangement can provide a wider clear opening where the available sliding space is restricted. It still needs a survey to establish whether the configuration suits the shopfront.

The opening also needs to work with nearby displays, security pedestals and customer queues. A wide doorway offers little benefit if its approach is obstructed.

Automatic Swing Doors for Retail Premises

Automatic swing doors use a hinged leaf operated by a powered mechanism. They may suit smaller shops, individual retail units or entrances where an existing swing door could potentially be retained.

Depending on the specification, activation may use approach sensors, push pads or touchless controls.

The main consideration is the space the door needs as it opens. The moving leaf must be assessed alongside customers approaching from either direction, nearby shelving and the pavement or entrance lobby outside.

An automated swing door may be a practical option where there is insufficient space for sliding leaves. However, it should be selected around the full entrance layout, including the appropriate protective devices and operating settings.

Elite Entrance Systems provides automatic swing door installation, repairs and maintenance and can assess whether this arrangement suits your retail premises.

Can You Automate Existing Shop Entrance Doors?

In some cases, an automatic operator can be added to a suitable existing swing door. This can be useful when the shopfront remains in good condition and the main issue is the effort required to open the door.

Before recommending an upgrade, an installer needs to assess:

  • The condition and construction of the door and frame.
  • Door dimensions, weight and existing hardware.
  • Space around the opening.
  • Activation and safety requirements.
  • Locking arrangements and any access control.
  • The door’s role in emergency escape.

An operator will not resolve every existing problem. A damaged frame, unsuitable threshold or restricted opening may mean more extensive work is needed.

A survey helps establish whether adapting the existing entrance is sensible or whether replacement would provide a better result.

Replacing the Shopfront and Automatic Doors Together

A full shopfront replacement may be worth considering during a refurbishment, particularly if the existing glazing, frame and entrance no longer meet the business’s needs.

Planning these elements together allows the door opening, glazing and surrounding framework to be designed as one installation.

Elite’s aluminium shopfronts are available with automated swing or sliding door systems. This gives retailers the opportunity to consider appearance and day-to-day access together.

For example, relocating an entrance may improve circulation inside a shop, but it could also affect the approach from outside. These decisions should be assessed before the design is finalised.

What Should Retailers Consider About Accessibility?

Automatic operation can remove the need to push or pull a heavy door. However, accessibility also depends on the route leading to it and the space available on either side.

Consider thresholds, clear opening width, visibility and whether controls can be reached and used comfortably. Customers may also need different amounts of time to pass through.

The Equality and Human Rights Commission’s guidance for retailers explains that businesses must anticipate disabled customers’ needs and make reasonable adjustments. Installing automatic doors may form part of that work, but does not by itself establish that every access barrier has been addressed. Our disabled access doors page explains more.

For relevant building work in England, Approved Document M, Volume 2 provides guidance on access to buildings other than dwellings. Its entrance guidance covers matters including control positions and sensor settings that allow sufficient time for safe passage.

Safety and Emergency Operation Need Planning

A busy retail entrance may be used by children, people who move slowly and customers distracted by bags or trolleys. Door safety needs to reflect these foreseeable users.

BS EN 16005:2023+A1:2024 addresses safety in use for powered pedestrian doorsets. The specification and assessment should consider the moving leaves, protective devices, activation and surrounding environment.

Discuss what happens during a power failure or emergency before choosing the system. Where the entrance forms part of an escape route, its operation needs to be coordinated with the building’s fire safety arrangements.

Security should be considered at the same stage. A door’s automatic opening function is separate from its locking specification, so closing procedures and any restricted access requirements need clear agreement.

Choosing Activation Settings for a Retail Entrance

Approach sensors can provide convenient entry, but their positioning matters. On a busy high street, unsuitable settings may cause the door to open whenever pedestrians pass outside.

Push pads or touchless controls may suit some locations, provided they are appropriately positioned and suitable for the intended users.

The decision should reflect how customers approach, where they pause and how they move once inside. Display changes and seasonal promotions also need to leave the entrance and detection areas clear.

Plan for Maintenance as Well as Installation

Retail doors experience repeated use, and their performance can change through wear, dirt, impact or alterations around the entrance.

Discuss servicing requirements when selecting the system, including manufacturer guidance, expected usage and how faults will be reported. Staff should understand the operating instructions and know what to do if the door behaves unexpectedly.

Elite Entrance Systems offers automatic door maintenance and repairs, helping retailers manage the condition of their entrance systems.

Which Automatic Doors Are Right for Your Shop?

Sliding doors are worth considering where customer flow and clear approach space are priorities. Swing doors may suit an existing opening, while a replacement shopfront offers more scope to rethink the entrance layout.

The most useful starting point is a survey of your premises and a discussion about how the shop operates.

Elite Entrance Systems provides automatic door installation, repairs and maintenance across London, the South East and the East of England. Contact our team to discuss your shop entrance and the options available.

Frequently asked questions

Are automatic sliding or swing doors better for a shop?

Sliding doors suit busier shops where customers come and go at the same time and there is space beside the opening for the door leaves. Swing doors can suit smaller units or an existing doorway where there is no room for sliding leaves. A survey of the entrance is the best way to decide.

Can an existing shop door be made automatic?

Often, yes. If the door and frame are in good condition, an automatic operator can be fitted to a suitable swing door. We check the door, frame, hardware, space and safety requirements first, as a damaged frame or awkward threshold may mean replacement is the better option.

Do automatic doors make a shop accessible?

They remove the need to push or pull a heavy door, which helps many customers. Accessibility also depends on the approach, thresholds, opening width, control positions and how long the doors stay open, so the whole entrance should be considered.

How often should automatic shop doors be serviced?

It depends on the manufacturer’s guidance and how busy the entrance is. A busy shop entrance generally needs more frequent checks than a quiet one. We agree a maintenance schedule after looking at the doors and how they are used.

Related Posts